Wrapping Paper

I love wrapping presents, so much so I'd do it as a job if I could.
Having said that I can feel rather guilty about the frivolous nature of wrapping gifts with paper and the cost to the planet. I always try to unwrap things carefully so I can reuse the paper for something, be it to wrap something else or to make a card or line something, whatever it is it's good to reuse and is cost-effective too- a nice bonus! There are some really gorgeous papers out there that are such good quality they can be used over and over, especially if tied with ribbon instead of using sticky tape.

I'm always on the look out for for things to use as wrapping paper or to make gifts bags etc.
With this philosophy in mind I rescued some paper from work recently after the photocopier had a "software malfunction" and printed out a document as a series of lines similar to a barcode. Most had an overall green appearance due to the stripes being blue, yellow and black and some were just black and white.

I immediately thought the green tone paper would make great Christmas wrapping and the black and white could be easily jazzed up.

I made a gift bag using one sheet of the green, just the right size to pop a few small Christmas presents before finishing it off with a festive bow. I used a box of tea as the base structure (see below) and began wrapping as per normal at one end but without sticking anything down. I then drew a flap template at the other end which I cut out with scissors. I stuck the edge and the folded end together with double sided sticky tape and attached a strip along the edge of the flap, ready for sealing.

Using this wonderful origami tutorial from the delightful Gathering Beauty, I used two, green sheets to make a box. I finished it off with red and white striped washi tape along with a gift bow made with the same tape and plain paper off-cuts. It's just right for a Christmas present of jewellery. 

I used a pink and a yellow highlighter to spruce up a sheet of black and white, I thought this was "bang on trend" ;-) as neon is everywhere at the moment and would be good for my friend's birthday as she likes bright colours. It looks great with black ribbon

Making your own stamps as in this post is a great way to personalise plain paper into something a little more special and could even make newspaper a possible source?!
The other black and white sheet was calling out for haphazardly stamped, hot pink bumblebees and to be made into a gift bag.

I covered it with transparent, sticky vinyl then I used the same technique as the Christmas bag, although, this time, I stuck the edge and flaps down as I went.

I then folded the top 2cm down all the way around and cut 2 holes in both of the wide sides approximately 1cm down. I threaded a piece of ribbon (liberated from inside a cardigan) through each side to create handles and used a bead on each end before knotting for extra security. I also popped a rectangle of card in the bottom for a bit of extra strength.

When that's all done you're left with with a lovely little gift which is durable enough to be used over and over!

I hope you like the results? Thanks so much for visiting my blog.

Until next time- craft in earnest, Craftin' Ernest x

Key Keeper

Today's post involves an extremely simple tutorial for a handy little item if, like me, you are prone to losing things, I'm calling it a Key Keeper and it's inspired by a nifty little thing the local police gave out a few years ago. I'm terrible for losing things, in fact, the more I try not to the quicker I seem to lose an item.
Keys are a good example, so this handy crafted solution not helps prevent their loss but also makes it much quicker to find them in a large handbag (my favourite kind of handbag as you can pack it full of "stuff"). You can also use it for certain purses to help against pickpockets, if you can attach it to part of the purse - a zip pull for example.

All that's needed is a shoelace, 2 clasps, a needle and thread, scissors and a way of sealing the end of the shoelace again- I find either a lighter for a nylon shoelace or clear nail varnish/glue works well.
I've bought particularly snazzy laces especially but any old ones would do.

Cut off the aglet from each end, i.e. the coated ends (thanks to an episode of Disney's Phineas and Ferb for teaching me the actual name) and seal the ends. If using the lighter make sure you do it safely, it only takes a few seconds for the ends to melt and you don't want it to smoke. With the nail varnish, coat the ends with a thick layer and leave it to dry completely.

Thread one end through a clasp and sew it in place (I actually used a sewing machine but it can be done by hand instead).
Repeat for the other end.

Then you just attach one clasp to your keys (or purse if possible or even both) and the other to your bag! Easy peasy.

Here's an alternative using a split ring at one end instead...

Teapot Magnet

I go to a weekly pottery club called "All Fired Up in Monmouthshire", Monmouthshire being my home county. It's great we meet every Thursday during the school term-time as it's held in a local secondary school.
Due to this we have no access to the kiln during the school holidays and to get my clay fix, I use air-drying clay. Obviously it's not quite the same as real clay but it has some great advantages- you don't need access to a kiln, the results can be achieved much quicker and it's great to use with children. Once it's completely dry, it can be painted with most types of paint, for example acrylic, enamel or emulsion- those little tester pots coming in very handy again.

If like me, you have a lot of friends who positively can not live without their daily cup of tea, here's a great little present you can make for them using air-drying clay.

You need air-drying clay of whichever brand you choose, there's quite a few available, here are two examples:

A cookie cutter in the shape of a teapot
A magnet
Glue
A sharp or pointy implement
Paint
Something to roll the clay out, e.g a rolling pin (not used for food) or a chunky knitting needle
Possibly sandpaper/emery board

Mini letter stamps are great but optional
A small oval shape cutter is also very handy but not strictly necessary
Varnish if you desire a shiny finish (nail varnish or watered down PVA both work well)

Roll out a section of clay so it's evenly approximately 5mm (3/16") thick.

Use the teapot cutter to cut out as many teapots as you require.

Using your sharp tool or the oval cutter cut out a shape to create a proper handle, make sure the top and bottom aren't too thin.

Using either the letter stamps or your pointy tool write a tea related slogan into the pot.
For example "Time for a Cuppa" or "Stick the Kettle On". Alternatively if you have a steady hand to can paint this on afterwards or leave it plain even.

Left teapot's slogan done by hand, right side using stamps

Now you just have to leave it somewhere safe to dry. As it's quite thin it shouldn't take too long depending on the conditions. I tend to leave it at least 24 hours and turn it over a couple of times during that time so it dries evenly on both sides.
Once you are happy it's nice and dry if the edges are a little rough, a gentle rub with sandpaper sorts smooths it out.

Left teapot, edges are unsanded. Right teapot sanded

Then it's time to get the paints out. The colour and design can be as simple or bold as you decide but I do like to highlight the lettering. Polka dots always look great and blue and white are a classic choice. Once the paint has dried coat in varnish if required.

All that's needed now is to glue a magnet on the back (making sure it's strong enough to hold the weight of the teapot) and you're done!

If you're giving it as a gift a little personalised tag attached to the handle with a ribbon is a lovely finishing touch in my opinion.

Keep crafting in earnest, Craftin' Ernest x